Court manual / PC release · keyboard & mouse

Choose your camera, cursor and HUD settings

Start with Dynamic for ball tracking or Static for a fixed view from your side, then press C to compare all four cameras. Zoom with V or the wheel. In Profile settings, use Reach Marker for contact timing and Last Touch Outline to see who touched the ball.

Updated 2026-11-16 · PC release · keyboard & mouse

  1. CCompare the views
  2. V / wheelKeep the court visible
  3. ProfileAdjust HUD and assists

From input to contact

  1. Compare the four cameras on the court

    Open Practice → Tutorial and reach the Camera section, or compare the views in Free Play. Keep your player in the same part of the court while pressing C. Pick the view in which you can read your depth and keep the intended target visible.

    Static camera looking down the full court, with C and V promptsOpen full-size image ↗
    Static shows the court from your own side. C changes view; V or the wheel changes zoom. Community tutorial image from a beta build; release-day inputs are described in the text.
    Camera choices and the trade-off to check
    CameraWhat it showsCheck before choosing
    DynamicTracks the ballCan you aim while the camera follows play?
    StaticLooks down from your sideCan you judge near and far landing points?
    BroadcastSide-on elevated viewCan you distinguish court depth from this angle?
    ActionThird-person perspectiveCan you still see the next contact and target?
  2. Keep the cursor on a court target

    The cursor normally stays attached to a court location when the camera angle changes. A moving camera can still make aiming feel different: compare it while aiming at one teammate or court spot, rather than chasing a fixed screen pixel. Q returns the cursor to your own position. M enables free mouse mode and changes the normal court-fixed behaviour, so leave it off for the basic aiming check.

    Dynamic camera at a lower angle behind the player with the court target aheadOpen full-size image ↗
    Dynamic follows the ball; its framing changes with play. Compare how easily you can keep a chosen court target. Community tutorial image from a beta build; release-day inputs are described in the text.
  3. Choose the HUD aids that solve your problem

    Open Profile settings → Gameplay for HUD and input options, and Accessibility for the assists. Start with Reach Marker and Last Touch Outline so contact timing and touch ownership are visible. Place the charge indicator at the character, cursor, or a mix according to where you can see it while aiming.

    Settings with a specific job
    SettingWhat it changesUse it when
    Reach MarkerShows a contact-time markerYou cannot tell when the ball is in reach
    Last Touch OutlineOutlines the last player to touch in team colourA crowded rally hides touch ownership
    Charge indicator positionCharacter, cursor or mixed placementThe charge display is away from your attention
    Mouse sensitivityHow far the cursor movesYou keep overshooting or cannot reach a target
    Cursor assistRestricts the cursor’s range beyond the courtYou often aim too far outside the court
    Set assistKeeps the set cursor from crossing the netYou send intended sets into the opponent’s half
  4. Use the Reach Marker as a timing cue

    With Reach Marker enabled, watch for the sight-like marker as the ball becomes reachable. Try a timed grounded left-click receive, then check the outgoing ball reaches the cursor target. For sensitivity, begin with your current value, make one small change and repeat the same target movement; there is no single value that fits every mouse.

    Side-by-side Reach Marker off and on; the on view adds a sight to the ballOpen full-size image ↗
    nu’s HUD comparison: off on the left, on on the right. The added sight is the Reach Marker.
The result to look for

When it works

You can see the landing area, aim at a chosen court spot and recognize the contact cue without losing the target when the camera moves.

If it does not work

If C skips a camera you want, open Profile → Cameras and check its cycle option. If a set cannot aim across the net, check Set Assist. If camera motion makes cursor placement difficult, switch to Static and repeat the same receive before changing sensitivity again.

Play the next touch

Sources & version

Inputs and conditions follow nu’s Japanese specification guide and tutorial, updated for the November 16, 2026 PC release (November 17 in Japan). Screenshots retain their beta-build context.